############################################ # Midronome Firmware - Changelog # ############################################ ------------------------------------ Firmware v3.0 - released 30 May 2024 --- IMPORTANT: this upgrade modifies the settings An.1 and An.2, their value will be reduced by 1 after upgrading to 3.0 (and increased by 1 if you downgrade from 3.0). So make sure to adjust their value after upgrading to keep the same configuration. Fixed issues: * MIDI Forwarding to MIDI Out 2 is not working on Mac * Midronome PLAY flashes in 2.4.P. * Preventing conflict between U-SYNC and MIDI Commands by deactivating Start/Stop commands when using U-SYNC and Autoplay New Major Feature: * U-SYNC: simple, precise, and reliable synchronisation with DAWs Other changes/improvements: * All external sync modes now start right away * Sync modes: 2.4.P. has been removed, and MidroSync ("Syn") is now hidden * MIDI SysEx message limit for forwarding is now 500 bytes * New MIDI Commands to start as MIDI CC * The USB-MIDI interface "Clock Only" has now been removed * The analog speed settings (An.1 and An.2) now have a value of "0" to turn off the clock -> this means their setting will be changed after upgrading! * General improvements regarding synchronisation * General improvements regarding USB communication (more info & discussion on https://forum.midronome.com/viewtopic.php?t=274 ) ------------------------------------ Firmware v2.0 - released 04 Sep 2023 --- Fixed issues: * Resync does not work with Roland TR-8S * Midronome hangs USB-bus * Previously, MIDI Start over USB was sent when sending start on MIDI Out 2 only - now the USB follows MIDI Out 1 * Previously, sending resync by pressing the Play button was deactivated in Reset Mode - now always possible * Previously, there was a slight "pop" when playing the first metronome click - now moved to when the device starts * Previously, no clock was sent during "pre-sync" (when display shows "---") - now the clock is also sent during pre-sync New Major Features: * MIDI Notes Forwarding * Sync to 24ppq signal & improved sync to DAWs New Minor Features: * Auto-play mode when syncing (AudioSync/24ppq) * send All MIDI Notes Off with MIDI Stop * configure ANLG speed via MIDI CC Commands Internal improvements: * Improved timing on MIDI Start messages - now more "away" from the clock so receiving devices have time to process * External sync will not show "Err" anymore - it ignores pulses which are too fast * Full locked mode (setting "Loc" set to "FUL") has been REMOVED - now Locked mode will always be partial * Play button pressing time to send Resync is now changed to 300ms (was 1s before) * Module interface is now functional and ready for modules to come (more info & discussion on https://forum.midronome.com/viewtopic.php?t=237 ) ------------------------------------ Firmware v1.1 - released 22 Jun 2023 --- Fixed issues: * Resync Port 2 with Reset + Separate mode * DIN Sync / sync24 timing issues * ANLG clock corrected when using USB+Reset Mode New Minor features: * MIDI-USB CC Commands extended Internal improvements: * Improved clock timing when switching tempo * ANLG Clock now running on pure hardware * Stricter external sync (will disconnect for tempos < 30bpm) * Resync/reset from external sync is forwarded on DIN, ANLG, and MIDI (more info & discussion on https://forum.midronome.com/viewtopic.php?t=238 ) ------------------------------------ Firmware v1.0 - released 26 Apr 2023 --- First official release: * External sync improved and reactivated * Sync between two Midronomes improved * Error data saved in case of firmware crash changed * Few other minor bugs corrected ------------------------------------ Firmware v0.1 - released 15 Mar 2023 --- Firmware installed on devices from first batch, with no external sync option. Please upgrade to v1.0 or newer.